Radio Shack Surge Protector 61 189 User Guide

MAIN Outlet: Plug in your main component (usually a  
Package contents  
Communication connections  
Typical Power Connections  
TM  
TV or computer).  
Networking IN/OUT: Using an Ethernet cable (not  
supplied), connect your Ethernet jack to Networking  
IN and connect Networking OUT to your computer.  
SWITCHED Outlets: Plug in components that are only  
used when the main component is turned on. To save  
power, these will turn off automatically when the main  
component is turned off or goes into sleep/standby mode.  
ALWAYS ON Outlets: Plug in components that are  
used even when the main component is turned off.  
Surge Protector  
Users Guide  
Quick Start  
GROUNDEDWHEN LIT  
ALWAYS ON  
MAIN SWITCHED  
THE PERFORMANCE YOU NEED  
Features  
Phone IN/OUT: Using modular telephone cords (not  
supplied), connect your telephone wall jack to Phone  
IN and connect Phone OUT to your fax, modem, or  
telephone.  
Home Office  
HomeTheater  
PROTECTEDWHEN LIT  
Many home theater and home office components  
Energy-Saving Surge Protector  
continue to use (waste) electricity even when off”  
or in “standby” mode. Plug these devices into the  
SWITCHED outlets and they will automatically turn off  
when the main component is turned off.  
Coax IN/OUT: Using coaxial cables (not supplied),  
connect yourTV input (antenna, satellite, or cable) to  
Coax IN and connect Coax OUT to yourTV.  
Typical Power Connections:  
HomeTheater  
DVR  
Router or modem  
SWITCHED  
HomeTheater Home Office  
Please read this users guide before using your new surge  
protector.  
Home Office  
Guards your valuable equipment from sudden  
electrical spikes and surges.  
Filters electromagnetic and radio-frequency  
interference.  
Indicators alerts you when the AC line is no longer  
protected after a power surge or spike.  
MAIN  
TV or Receiver  
Computer  
User’s Guide  
61-189  
Satellite or  
VCR, DVD player,  
gaming system,  
powered speakers  
Printer, scanner,  
monitor, amplified  
speakers  
cable receiver  
Networking  
SWITCHED  
Phone OUT  
OUT  
VOIP phone  
Router, modem,  
VOIP phone, shared  
wireless printer  
VCR or DVD player  
Gaming system  
ALWAYS  
ON  
DVR, satellite or  
cable receiver,  
Scanner  
Printer  
1
4
7
2
5
8
0
3
6
9
#
1 Plug into wall outlet  
*
1. Switch RESET/OFF to OFF.  
RESET/OFF  
Safety Cover  
MAIN  
Home Office  
ꢀ. Plug the Surge Protector into a  
3 Turn on  
three-prong standard wall outlet.  
HomeTheater  
Switch RESET/OFF to RESET to turn on the surge protector.  
w
Caution: Do not plug this surge  
GROUNDEDWHEN LIT: Lights when connection to  
the wall outlet is properly grounded.  
PROTECTEDWHEN LIT: Lights when the connected  
devices are protected.  
MAIN SWITCHED: Lights when the device plugged  
into the MAIN outlet is turned on.  
protector into a non-grounded outlet.  
Doing so invalidates your Equipment  
Guarantee and puts your equipment at risk.  
Networking  
IN  
Phone IN  
2 Connect equipment  
Slide the Safety Covers aside and make the  
following connections:  
w
Caution: If PROTECTEDWHEN LIT or GROUNDED  
Powered speaker  
Monitor  
TV or receiver  
Computer  
WHEN LIT do not light, stop using the surge protector.  
Coax IN  
Coax OUT  
 

Radio Shack Conference Phone 17 920 User Guide
Renesas Network Card PCA4738FF 64 User Guide
Rinnai Furnace EX22 User Guide
Roland Musical Instrument Amplifier DC 13 User Guide
Samson Musical Instrument PL1602 User Guide
Samsung All in One Printer SLM2875FDXAA User Guide
Samsung Range FTQ352IWB User Guide
SanDisk Computer Drive SDUFD2AA 1024 User Guide
Sanyo Air Conditioner 36U72R User Guide
Sears Water Heater 153332040 User Guide